We will be showcasing at formnext 2024,
from November 19th to 22nd at Messe Frankfurt.
Experience our cutting-edge technologies at Hall 11.1, A15.
Why not book an appointment with us to ensure a meeting?

image slide01
image slide02
image slide03
image slide04
image slide05
image slide06
image slide07

EXTRIPPER, a patented paraffin wax-based agent,
is made with conventional environmentally friendly ingredients,
and it relieves the time-consuming process.

Notice of New Product Release
EXRIPPER SEVEN, Lost Wax Support
Material Removal for Jewelry CLICK
contact us

Differences in support material removal processes

Traditional process takes between two and three hours

Conventional Removal Process image

Extripper takes just 15 minutes

EXTRIPPER

Rapid method without manual procedure
It can completely remove support materials that are normally quite difficult to clean,
such as those clogged within fine pore shapes of 1 mm or less, or clogged within minute flow channels.

contact us

EXTRIPPER leads to tremendous contribution/benefits such as:

  • Relieve the workload without worrying about breakage or thermal deformation of the model material.
  • Simple work process makes it easy to use.
  • Support material clogged in the hollow shape can also be completely removed, expanding the application of 3D printer.

Equipment needed for removing the support material

EXTRIPPER JAM

EXTRIPPER BIKAN

Ultrasonic Cleaning
  • EXTRIPPER JAM
  • EXTRIPPER BIKAN
  • Beaker and Glass cups
  • Tray with holes
  • Water for Ultrasonic bath
  • Ultrasonic Cleaning Device with heating features: Oscillation around 40 kHz

Sustainability at RAISER MOON Co., Ltd.

We are committed to developing environmentally friendly products
and improving functionality without using
hazardous chemicals. A project to recycle used EXTRIPPER is currently underway.

Q&A

Q, Which support materials for which models of 3D printers can be removed by EXTRIPPER?
A, Highly suitable for the support material of 3D SYSTEMS Projet Series.
Q, Is it possible to perform the cleaning process without using an ultrasonic cleaning device?
A, It can also be performed in a hot water bath using an induction heater, but it takes more time to remove the support material.
Q, Can the EXTRIPPER be used repeatedly?
A, We recommend treating it as a consumable because the removal performance will deteriorate after use.
Q, Where can I see the EXTRIPPER technology?
A, We participate every year in FORMNEXT, taking place at Messe Frankfurt, Germany in November.
Q, Currently considering using the EXTRIPPER, where should we proceed to purchase?
A, Please contact us using the inquiry form on this page.

Contact Us

    E-mail addressRequired

    Your nameRequired

    Your company nameRequired

    Name of countryRequired

    Your addressRequired

    Your phone numberRequired

    ＋

    3D printer model you are using

    Your current support removal method

    Duration for removal of support material

    Current problems , if any